The following is a special report from Fast Growing Trees Nursery about how to effectively lower your energy costs, improve your landscaping, and save money all due to trees!
According to The Department of Environmental Protection, evergreen windbreaks are the most effective component in cutting winter heat loss. Research indicates that heat energy savings of up to 40 percent are possible resulting from diminished wind velocity and reduced air infiltration into your home. Considering the U.S. average, that could mean a savings of as much as $400 per winter!
Location is the most important factor in effectively planting a windbreak. The evergreens should be planted north and northwest of your home. That will place them perpendicular to the strongest and coldest winter winds. Plant the trees in a “U” or “L” shape to block the wind most effectively. The best zone of wind protection occurs from 2 to 7 times the height of the trees you plant. For example, if the mature height of the evergreens you’re planting is 20 feet, then the zone of maximum protection will occur 40 to 140 feet downwind. Keep this zone in mind when figuring out how close to a structure you’ll need to plant your trees for the greatest effect. Finally, decide how far apart to plant your trees. Plant them more closely to have them grow together quickly. Or plant them farther apart to save money but wait a little longer for them to fill in.
Keep a few things in mind as you plant your evergreen trees. Evergreens like full to partial sun and just about any soil conditions. Dig a hole slightly shallower and about twice the diameter of the root system. Use your shovel to scrape the walls of the planting hole so the roots can easily penetrate the soil as they grow. Then, set each tree in the planting hole and spread out the roots. The bottom of the hole should be firm enough to keep the tree from sinking after it’s planted. The top of the root ball should be about an inch above the surrounding soil. Then make sure the tree is straight up and down in the hole. A level is very helpful for accuracy.
Finally, apply water as you backfill the hole with soil to remove any air pockets. Break up dirt clods and remove any grass, stones or other debris. After the transplant is complete, water each tree again well. To keep the soil moist, it is recommended that you mulch around the tree. Use enough mulch to reach a depth of 2 to 3 inches. This will keep the moisture in and slow down the growth of weeds and grass.
For more detailed info on how to plant evergreen trees, visit Fast-Growing-Trees.com and check out their planting information.
